Parameter Description (ICD-CTU)
IP address
Set the IP address assigned to the Smart Web Unit.
To access the web application of the Smart Web Unit, enter http://[configured IP address] (or https://[configured IP address] when using TLS).
e.g.: http://192.168.0.100
To access the web application of the Smart Web Unit, enter http://[configured IP address] (or https://[configured IP address] when using TLS).
e.g.: http://192.168.0.100
Subnet mask
Set the subnet mask of the network to which the Smart Web Unit is to be connected.
Default gateway
When connecting via a router or gateway, set the IP address of the router or gateway in your network environment as the default gateway.
If this unit does not communicate with networks outside the subnet, set it to No Setting (0.0.0.0).
If this unit does not communicate with networks outside the subnet, set it to No Setting (0.0.0.0).
DNS (Primary)
Set the IP address of the primary DNS server.
DNS (Secondary)
Set the IP address of the secondary DNS server.
HTTPS redirect
When set to 0 (disabled), an HTTP protocol request to this unit will be redirected using the HTTP protocol. When set to 1 (enabled), an HTTP protocol request to this unit will be redirected to the HTTPS protocol.
mDNS
Configure whether mDNS (Multicast DNS) is enabled or disabled.
When set to “Enabled", the unit monitors mDNS multicast traffic and, if a query matches the hostname configured on this unit, it responds with its own IP address.