Parameter Description (ICD-ETSE)
IP address
Set the IP address assigned to the Ethernet/RS-485 Converter.
Subnet mask
Set the subnet mask of the network to which the Ethernet/RS-485 Converter is connected.
Default gateway
When connecting via a router or gateway, set the IP address of the router or gateway in your network environment as the default gateway.
If this unit does not communicate with networks outside the subnet, set it to No Setting (0.0.0.0).
If this unit does not communicate with networks outside the subnet, set it to No Setting (0.0.0.0).
Port number for UDP search frame
Set the port number used by the Smart Web Unit or IA-OS to detect Ethernet/RS-485 Converters on the network.
Inactive time
This is a response monitoring timer for controllers connected to the WLAN/Bluetooth converter.
In general, there is no need to change the default value, but if communication with the controller is not stable, increase the value for adjustment.
In general, there is no need to change the default value, but if communication with the controller is not stable, increase the value for adjustment.
SIO communication speed selection code
Set the communication speed with the controller.
In general, there is no need to change the default value, but if communication with the controller is unstable due to noise or other factors, reduce the communication speed for adjustment.
In general, there is no need to change the default value, but if communication with the controller is unstable due to noise or other factors, reduce the communication speed for adjustment.