Pulse Motor Equipped Models, 24V AC Servomotor Equipped Models
The ELECYLINDER brake is a non-excitation actuating solenoid brake.
The brake should be released automatically during normal operation, but it will activate when the servo is turned off or the power is turned off.
In order to move the moving part by hand, it is necessary to release the brake. Refer to Way of Wiring (for Connect to PIO Control / Cables) [Brake Release Wiring].
The brake should be released automatically during normal operation, but it will activate when the servo is turned off or the power is turned off.
In order to move the moving part by hand, it is necessary to release the brake. Refer to Way of Wiring (for Connect to PIO Control / Cables) [Brake Release Wiring].
The brake specifications of ELECYLINDER (Pulse motor equipped models) should be as described follows.
Item | Content |
|---|---|
Brake release power supply | 24V DC ±10%, 200mA (only for external brake release) |