200V AC Servomotor Equipped Models
The brake on the ELECYLINDER adopts a non-exciting operation electromagnetic brake.
The brake should be released automatically during normal operation, but it will activate when the servo is turned off or the power is turned off.
The brake should be released automatically during normal operation, but it will activate when the servo is turned off or the power is turned off.
The specifications for the brake are as shown below.
Item | Content | ||
|---|---|---|---|
Brake release power supply | Power voltage | 24V DC ±10％ | |
Power supply current | Model | Specification | |
EC-S10□/S10X□ | 0.22 A (No overexcitation) | ||
EC-S13□/S13X□ EC-S15□/S15X□ | 0.875 A (when in overexcitation) 0.085 A (when steady) | ||
EC-S18□/S18X□ EC-S18LP/S18XLP EC-S18LFR/S18XLFR | 0.753 A (No overexcitation) | ||
Caution
- It is used only when releasing a brake externally.