Maintenance Information
This section introduces three items that can be configured and managed as maintenance information.
When the set values are exceeded, a "maintenance warning" is issued and the LED1 (Servo / Alarm) flash alternately in red and green.
* Only the servo (green) LED lamp should flash for the 200V AC servomotor equipped models.
When the set values are exceeded, a "maintenance warning" is issued and the LED1 (Servo / Alarm) flash alternately in red and green.
* Only the servo (green) LED lamp should flash for the 200V AC servomotor equipped models.
Even if a "maintenance warning" is generated, the ELECYLINDER will continue to operate without interruption.