Basic Operation
An input signal from a master device to the ELECYLINDER triggers operation of the ELECYLINDER.
The ELECYLINDER status can also be determined when the master device receives signal output from the ELECYLINDER.
The ELECYLINDER status can also be determined when the master device receives signal output from the ELECYLINDER.
Control is just as simple as when using a solenoid valve (Solenoid valve) and air cylinder drive.
This manual introduces an example using a PLC connected as the master device.
This manual introduces an example using a PLC connected as the master device.
Reference
- The ELECYLINDER continues operation while a movement command signal is input, outputting a position detected signal when the movement is complete. Turning the movement command signal OFF before the movement is complete interrupts the operation and causes a gradual stop. Home return operation is similar.