Parameter No.8: Energy-Saving Setting
No. | Category | Name | Unit | Input range | Default setting at shipping |
|---|---|---|---|---|---|
8 | A | Energy-saving setting | - | Disabled, Enabled | Disabled |
- Either Enabled or Disabled can be selected for the ELECYLINDER Energy-saving setting.
- When "Enabled," the power capacity can be reduced up to 40% compared to "Disabled" mode, but the maximum speed, maximum acceleration/deceleration, and payload decrease in comparison.
Refer to the following sections in Chapter 1 Specifications in an instruction manual of each ELECYLINDER for the details of specifications when power saving feature is set to "Enable":
・ Lead and Payload (Power-saving: Enable)
・ Stroke and Max. Speed (Power-saving: Enable)
・ Payload by Speed/Acceleration (Power-saving: Enable) - When "Disabled," the maximum speed, maximum acceleration/deceleration, and payload increase compared to "Enabled" mode.
Refer to the following sections in [Chapter 1 Specifications in an instruction manual of each ELECYLINDER] for the details of specifications when power saving feature is set to "Disable":
・ Lead and Payload (Power-saving: Disable)
・ Stroke and Max. Speed (Power-saving: Disable)
・ Payload by Speed/Acceleration (Power-saving: Disable)